BSNL-JTO 2008 EXAM Syllabus

Last Updated on Tuesday, 8 July 2008 05:33 Written by Editor Sunday, 2 March 2008 07:42

Negative marking is 33%. Generally cut-off for general category students is around 50-60 marks out of 150, which will be less for O.B.C/S.C/S.T category students. There will be no interview for final selection, criterion will be only written examination.

The objective type examination shall be of 3 hours duration with one question paper containing 3 sections of Engineering Stream Section-I, Engineering Stream Section-II and General Ability Test Section-III. The Engineering Stream Section-I and Section-II would include 50 questions each and General Ability test Section-III would include 20 questions. However, there would be no separate time fixed for attempting the separate sections.

SECTION – I

1. Materials and components

Structure and properties of Electronic Engineering materials, Conductors, Semiconductors and Insulators, Magnetic, Ferroelectric, Piezoelectric, Ceramic, Optical and Superconducting materials. Passive components and characteristics, Resistors, Capacitors and Inductors; Ferrites, Quartz crystal, Ceramic resonators, Electromagnetic and Electromechanical components.

2. Physical Electronics, Electron Devices and ICs

Electrons and holes in semiconductors, Carrier Statistics, Mechanics of current flow in a semi-conductor, Hall effect; Junction theory; Different types of diodes and their characteristics; Bipolar Junction transistor; Field effect transistors; Power switching devices like SCRs, CTOs, power MOSFETs; Basics of ICs-bipolar, MOS and CMOS types; Basics of Opto Electronics.

3. Network theory

Network analysis techniques: Network theorem, transient and steady state sinusoidal response, and Transmission criteria: delay and rise time Elmore’s and other definition, effect of cascading. Elements of network synthesis.

4. Electromagnetic Theory

Transmission lines: basic theory, standing waves, matching applications, micro strip lines; Basics of waveguides and resonators; Elements of antenna theory.

5. Electronic Measurements and instrumentation

Basic concepts, standards and error analysis; Measurements of basic electrical quantities and parameters; Electronic measuring instruments and their principles of working: analog and digital, comparison, characteristics, and applications. Transducers; Electronic measurements of non-electrical quantities like temperature, pressure, humidity etc. Basics of telemetry for industrial use.

6. Power Electronics

Power Semiconductor devices, Thyristor, Power transistor, MOSFETs, Characteristics and operation. AC to DC converters; 1-Phase and 3-phase DC-to-DC Converters.

AC regulators. Thyristor controlled reactors, switched capacitor networks.

Inverters: Single-phase and 3-phase. Pulse width modulation. Sinusoidal modulation with uniform sampling. Switched mode power supplies.

SECTION-II

1. Analog Electronic Circuits

Transistor biasing and stabilization, Small Signal analysis. Power amplifiers. Frequency response, Wide band techniques, Feedback amplifiers. Tuned amplifiers. Oscillators. Rectifiers and power supplies. Operational Amplifier, other linear integrated circuits and applications. Pulse shaping circuits and waveform generators.

2. Digital Electronic Circuits

Transistor as a switching element; Boolean algebra, simplification of Boolean functions, Karnaugh Map and applications; IC Logic gates and their characteristics; IC logic families: DTL, TTL, ECL, NMOS, PMOS and CMOS gates and their comparison; Combinational logic circuits; Half adder, full adder; Digital Compartor; Multiplexer Demultiplexer; ROM and their applications. Flip-flops, R-S, J-K, D and T flip-flops; Different types of counters and registers; waveform generators. A/D and D/A convertors. Semiconductor memories.

3. Control Systems

Transient and steady state response of control systems; Effect of feedback on stability and sensitivity, Root locus techniques; Frequency response analysis. Concepts of gain and phase margins; Constant-M and Constant-N Nichol’s Chart; Approximation of transient response from Constant-N Nichol’s Chart; Approximation of transient response from closed loop frequency response; Design of Control Systems, Compensators; Industrial controllers.

4. Communication systems

Basic information theory: Modulation and detection in analogue and digital systems; Sampling and data reconstruction. Quantization & Coding; Time division and frequency division multiplexing; Equalisation; Optical Communication: in free space & fiber optic; Propagation of signals at HF, VHF, UHF and microwave frequency; Satellite communication.

5. Microwave Engineering

Microwave Tubes and solid state devices, Microwave generation and amplifiers, Waveguides and other Microwave Components and Circuits, Microstrip circuits, Microwave antennas, Microwave Measurements, MASERS LASERS; Microwave Propogation. Microwave Communication Systems-terrestrial and satellite based.

6. Computer Engineering

Number Systems; Data representation; Programming; Elements of a high level programming language PASCAL/C; use of basic data structures; Fundamentals of computer architecture processor design; Control unit design; Memory organization. I/O System Organization. Personal computers and their typical uses.

7. Microprocessors

Microprocessor architecture – Instruction set and simple assembly language programming. Interfacing for memory and I/O. Applications of Microprocessors in Telecommunications and power system.

SECTION-III

General ability test

The candidate’s comprehension and understanding of General English shall be tested through simple exercises. Questions on knowledge of current events and of such matter of everyday observation and experience in their scientific aspects as may be expected of an educated person. Questions will also be included on events and developments in Telecommunications, History of India and Geography. These will be of a nature, which can be answered without special study by an educated person.

Training For BSNL JTO Can be Taken in the following Institute:
ADDRESS:
28A/11, Jia sarai,Near IIT Delhi,
New Delhi-110016

Ms Vandana Agrawal
phone: 9811382221
website: www.panaceainstitute.org.in

Should you have any query or feed back, please feel free by posting them at panacea_institute@rediffmail.com

The Result For BSNL JTO Exam Held This June 2008 Will be Announced Probably in November or December.

Submit a Paper @ info[@]freshershome.com Replace [@] with @.




739 Comments
1 ... 25 26 27 28 29 ... 35
  1. sir,now i am doing my B.TECH (ELECTRONICS) 3rd year my pass out is by 2010.
    so can i write the exam in june 2009.or i have to write after completion of my degree.

  2. may i know the salary offered for the gradutae engineer JTO

  3. can b/teceh 2009 out comers can apply to jto

  4. dear sir/madam

    I am completed BSC(maths)2002 & MCA(CS) in 2006. I am eligible for jto and which subjects for me prefer.

  5. Hello sir..,i am a EcE final year student…i complete my b.tech in may 2k9 .can i appear 4 JTO this year?

    can u suggest some gud books [with publishers name] that give clear idea of concepts and a lot of objective questions……??……..it will be a great help for me…………can u send some sample papers to my email address??…….thanks in advance ………..

  6. can u tell me about important dates of jto 2k9?

  7. hello sir,
    i want to know when jto exam 2009 is held…

  8. Dear sir,
    I am a B.E cse graduate. can i know the commencement of JTO exams for 2009.will you please recommend the books for preparing JTO exam

  9. hi sir

    i am a eee gratude. i completed my b.tech 5 yrs
    cani eligible forjto jobs.what about the percentage
    require for jto jobs.if eligible tell me about booksname.This year i would like to prepare for bsnljobs.

    thanking you

  10. hi sir,
    iam a eee gratude. i am completed my b.e 5 years.can i eligible for bsnl jobs.please tell me sir.what is percentage required for bsnl jobs.if eligible tell me the booknames.

    thankingyou

  11. HI..
    I M A STUDENT OF B.TECH. ENGINEERING OF INFORMATION TECHNOLOGY.I WOULD LIKE TO KNOW WHETHER AM I ELIGIBLE FOR THE BSNL JTO EXAM .
    THANKS

  12. hi..
    i want know other exa. like jto in public sector.
    i am third year eic student. i also want name of exa which only requried eic student

  13. hi sir,
    i am a cse under graduate. may i know which book is good for a cse student for JTO preparation? Is paper is same for ece and cse?

  14. sir i have done Msc(IT), am i eligible for BSNL JTO?

  15. please tell me when ll bsnl jto 2009 notification will be issued or will it be issued for this year or not As for TTA the vacancies are opened for the 2007 and 2008 so please inform me about this

  16. Hii sir,
    I am swetha.I am btech ece student.Can you send me the syllabus for electronics and communication branch?

  17. Dear sir,
    i am an ECE graduate and i will complete my degree in june 2009. Can i apply for the post of JTO in 2009.

  18. i studied btech in the stream INFORMATION TECHNOLOGY am I eligible for the exam syllabus for JTO

  19. Sir,
    JTO exam, will it be every year or not?
    thanking you, Sir.

  20. Sir,
    JTO exam, will it be every year or not?
    thanking you, Sir.

  21. HI

    I AM A STUDENT OF B.TECH IN ELECTRONICS AND COMMUNICATION.I WOULD LIKE TO KNOW WHETHER THE QUESTIONS ARE BITS AND IS THERE ANY NEGIVE MARKING FOR THE BSNL JTO EXAM.AND PLZ SUGGEST ME WHICH BOOKS SHOULD BE FOLLOWED WITH AUTHOR NAME….AND ALSO PLZ SEND ME THE PREVIOUS PAPERS.
    WHEN AND HOW MANY TIMES THE EXAM WILL BE CONDUCTED IN A YEAR.

    THANKING U
    L.SHRUTHI

Leave a Reply