Verifone Placement paper and pattern
VERIFONE INDIA PVT. LTD. QUESTION PAPER :
This test consists of two parts :
——————————-
1.aptitude 20 questions 15 min.
2.technical 45 questions 30 min.
APTITUDE QUESTIONS
Few aptitude questions out of 20(15min time).
—————————————
>>> All these are from GMAT’96 edition(galgotia publications) :
1.if length of a rectangle is incr by 20% and width is decr by 20% then area:(page 44)
ANS:decreases by 4%.
2.the lead in pencil is 5inch long.after pieces of 1/8.1-3/4,1-1/12inches are broken how long is the lead left in the pencil:(page44)
ANS:2-1/24inch.
3.how many two digit numbers satisfy the property:the last digit of the sqr of the two digit number is 8:(page45).
ANS:none.
4.city B is 8miles east of city A.city C is 6 miles north of city B. and so on.(page 45):
ANS:30miles .
5.if 50 apprentices can finish a job in 4 hours and 30 journey men can finish the same job in 4-1/2 hrs and so on.(page 46).
ANS:29/180.
6.there are 50 employees in the office of ABC company.and so on.(page 52.)
ANS:10.
7. what is the max no of points of intersection of two circles of unequal radii. (page 55).
ANS:2.
8.if the area of square increases by 69% then side of the square increased by:
ANS:13%
9.if x,y,z are chosen frm -3,1/2,2 what is the largest value of (x/y)*z*z (page 305.)
ANS:36.
10.a club hs 8 male 8 female members.(page 307):
ANS:3136.
11.sum of 5 consecutive numbers is 35. how many of the numers are prime:
(page 368).
ANS:2.
12.if the product of three consecutive int is 210,then sum of the two smaller ints is:(page 386).
ANS:5+6=11.
13.there are 27 coins in which 0ne is heavier than rest(all equal weight). how many measurements are needed to isolate that odd one.
ANS:3.
TECHNICAL TEST QUESTIONS
there will be 45 questions.
15(elec) + 5(netw) + 5(os) + 5(compilers and algos)
+ 5(database and misc.) + 5(datastructures) + 5(c progs).
Section: ELECTRONICS:
1.A logic ckt is given and asked to identify the configuration.
ANS: XOR.
2.multi vibrator with nor gates is given
ANS: astable multi sqr wave opt.
3.4 stage ripple counter with delay(f/f) 10msec. How much time it takes
for a state to change.
ANS:4*10=40.
4.impedence of a parallell resonant circiut at resonance:
ANS:R.
5.serial to parellel conversion is done by :
ANS:shift register.
5.if the address bus is 20bits.then the memory space is :
ANS:1MB.
6.filtering can be done with:
i)capacitor,ii)inductor,iii)both,iv)none.
ANS:both.
7.two progs are given. one satrts counting frm 0 to MAX and the other
stars frm MAX to 0. which one executes fast.
ANS:may be Max to 0.Think of it.
8.problem using three registers.
ANS: register A is multiplied by 11.
9.the config that is worst effected by low CMMR
ANS:Non inverting amplifier.
—- Another 6 questions are there. simple.
Networks:
——–
1.which is not used for error correction :
ANS :bit stuffing.
2.which of the following is not fctn of datalink layer:
ANS : Encryption.
3.voltage levels of rs232c:
ANS :+12,-12.
4.which of the following is not used for client/server.
i)RPC,ii)TCP/IP,iii)MESSAGEQs,iv)None
ANS: none.
5.
Database:
——–
1. which of the following is true.
ANS:the primary key in databases design is very important.
2. ANS : SQL is a Non procedural query language.
3. ANS : Time for insertion is more than time for modification.
4
5.
Compiler/algo/ds:
—————-
1.Data structure used to implement a menu:
ANS :doubly linked circular linked list.
2. some regular expression is given:WaW’.
ANS : may be it is context free grammar.
3.
4.
5.
OS:
—
1.The feature of real time os is:
ANS: fast context switching.
2.ANS:os implements protection with the help of hardware(like virtual
addressing in 386/286 etc).
C programming:
————-
some small C programs are given asked to tell the function/errors etc.
one of the qstn(last in the paper) is an invalid statement. finish of all these very fast and think about those others. they are simple only.
1.int a=2,b=3,c=4;
printf(“a=%d,b=%d\n”,a,b,c);
ANS:2,3
2.for(i=1;i<10;++i,printf(“%d”,i));+-
ANS:compiling error.
3.whole logic is given in func s but they are working properly. the main logic is :
char *string;
string=malloc(5*sizeof(char));
strcpy(string,”hello”);
printf(“%s”,string); /* func to print */
ANS: hello and some extra characters until uccerence of \0 .
4. in a system integer takes 3bytes and char takes 1byte …….
struct smthing{
int a;
char b[4];
};
ANS : sizeof struct smthing is 7 bytes.
Interview:
It depends on the member.
1.Mr.Deep asks architect of 586/486/386/286 etc. otherwise DS,OS,C,TCP/IP.
2.Mr.Abhik asks about compiler design and TCP/IP.
Suggestions in attempting :
Aptitude test:
1.attempt easy questions first.
Technical test :
1.Attempt C programs first.
2.Network, os, data structures,compilers etc.
3.Electronics and electrical.
